RockHard POLY Polyaspartic Kit

Rockhard POLY is a fantastic

polyaspartic coating kit

for commercial flooring contractors, capable of being used on the most demanding floors. Use our epoxy, polyaspartic and polyurethane comparison to check which coating type suits the project. Compare the full range of protective floor coatings before choosing a finish. It is useful in several areas and can be installed as a base floor coating or polyaspartic

topcoat

with decorative floors like a vinyl chip, coloured quartz, or metallic surfaces. When using it as a topcoat over epoxy, compare the RockHard USA epoxy base coat kit and confirm system compatibility.

Features and Benefits

• Low Odour
• Fast cure times with excellent adhesion
• Superior chemical resistance
• Superior abrasion resistance
• Non-yellowing and good gloss retention
• Easy to mix 1:1 ratio by volume
• Excellent adhesive properties allow application on other firm and hard coatings as well as providing a good bond to the substrate
• VOC compliant

Build practical system-selection and application skills through our practical epoxy and polyaspartic training.

Most Commonly Applied Polyaspartic Coatings: Marine protection for fibreglass, steel, concrete, or wood, UV-stable topcoat, Aircraft hangar floors, Low-temperature equipment, Maintenance facilities, Offshore platforms, Industrial shop floors, Car washes or wash bays, Secondary Containment, Cooling towers, Bridges, and Wastewater treatment applications.

The RockHard POLY Polyaspartic Kit is widely used by

epoxy resin

installers worldwide as an effecting

floor sealant.